Rohde & Schwarz RTE Series - Page 1523

Remote control commands
R&S
®
RTE
1523User Manual 1326.1032.02 ─ 20
Query parameters:
<SearchName>
Return values:
<Standard> CAN | CANFd
*RST: CAN
Usage: Query only
SEARch:RESult:CAN:FRAMe<m>:STARt? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<FrameStart> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:CAN:FRAMe<m>:STATus? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<FrameState> OK | FORM | BTST | CRC | CRCD | NOACk | ACKD | EOFD |
CAERror | FCERor | INSufficient | SERRror | SFERror |
SCERror | SAERror | SCAE | SCFE
See BUS<m>:CAN:FRAMe<n>:STATus? on page 1502.
*RST: OK
Usage: Query only
SEARch:RESult:CAN:FRAMe<m>:STOP? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Protocols