Rohde & Schwarz RTE Series - Page 1152

Remote control commands
R&S
®
RTE
1152User Manual 1326.1032.02 ─ 20
Usage: Event
Asynchronous command
ZVC:Z<m>:V<n>:OVERload:VALue?
Queries if an overload of the voltage channel was detected.
Suffix:
<m>
.
1..2
<n> 1..4
Return values:
<Overload> ON | OFF
*RST: OFF
Usage: Query only
Asynchronous command
ZVC:Z<m>:V<n>:POSition
<VertPosi>
Sets the vertical position of the indicated voltage channel as a graphical value.
Suffix:
<m>
.
1..2
<n> 1..4
Parameters:
<VertPosi> Range: -5 to 5
Increment: 0.02
*RST: 0
Default unit: div
Usage: Asynchronous command
ZVC:Z<m>:V<n>:SCALe <VerticalScale>
Sets the vertical scale for the voltage channel in Volts per division. Increasing the scale
compresses the display of the signal.
Suffix:
<m>
.
1..2
<n> 1..4
Parameters:
<VerticalScale> Range: 1E-15 to 10E+24
Increment: 10E-6
*RST: 3
Default unit: V/div
Usage: Asynchronous command
Acquisition and setup