Rohde & Schwarz RTE Series - Page 1438

Remote control commands
R&S
®
RTE
1438User Manual 1326.1032.02 ─ 20
<n> *
Selects the frame.
Return values:
<AddressType> BIT7 | BIT7_RW | BIT10 | AUTO | ANY
*RST: BIT7
Usage: Query only
BUS<m>:I2C:FRAMe<n>:ASTart?
Returns the start time of the address for the indicated frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<AddressStart> Range: -100E+24 to 100E+24
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:I2C:FRAMe<n>:BITRate?
Returns the primary bit rate.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<PrimaryBitRate> Range: 0 to 100000000000
Increment: 1
*RST: 0
Default unit: bps
Usage: Query only
BUS<m>:I2C:FRAMe<n>:RWBStart?
Returns the start time of the R/W bit
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols