Rohde & Schwarz RTE Series - Page 1504

Remote control commands
R&S
®
RTE
1504User Manual 1326.1032.02 ─ 20
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<FrameType> DATA | REMote | ERR | OVLD
Data, remote, error or overload frame.
*RST: DATA
Usage: Query only
BUS<m>:CAN:FRAMe<n>:DATA?
Returns the data of the specified frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<Data> Comma-separated list of values. The first value is the number of
bytes, followed by the values of the data bytes.
Example:
BUS1:CAN:FRAMe2:DATA?
--> 3,208,231,32
Returns the data of the second frame: the number of bytes is 3
data (first value).
Usage: Query only
BUS<m>:CAN:FRAMe<n>:ACKState?
BUS<m>:CAN:FRAMe<n>:CSSTate?
BUS<m>:CAN:FRAMe<n>:DLCState?
BUS<m>:CAN:FRAMe<n>:IDSTate?
Return the states of following parts of a message
●
ACKState: state of acknowledgement field
●
CSSTate: state of checksum field (CRC)
●
DLCState: state of data length code
●
IDSTate: identifier state
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Protocols