Rohde & Schwarz RTE Series - Page 1517

Remote control commands
R&S
®
RTE
1517User Manual 1326.1032.02 ─ 20
SEARch:TRIGger:CAN:FORMerror <SearchName>,<FormError>
SEARch:TRIGger:CAN:FORMerror? <SearchName>
Searches for form errors. A form error occurs when a fixed-form bit field contains one
or more illegal bits.
Parameters:
<FormError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:FDATa:SCERror
<SearchName>,<StuffCountError>
SEARch:TRIGger:CAN:FDATa:SCERror? <SearchName>
Triggers on stuff count errors. A stuff count error occurs if th received stuff count value
does not match the value calculated from the own stuff bit count.
Only relevant for CAN FD signals in ISO standard.
Parameters:
<StuffCountError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:FDATa[:FDF] <SearchName>,<FDFBit>
SEARch:TRIGger:CAN:FDATa[:FDF]? <SearchName>
Sets the EDL bit (extended data length), which determines whether a frame is CAN or
CAN-FD.
The setting is available in CAN FD option R&S RTE-K9.
Parameters:
<FDFBit> ONE | ZERO | DC
ONE: CAN FD.
ZERO: CAN.
DC: don't care, the format is not relevant.
*RST: DC
Parameters for setting and query:
<SearchName> String with the search name
SEARch:TRIGger:CAN:FDATa:BRS <SearchName>,<BRSBit>
SEARch:TRIGger:CAN:FDATa:BRS? <SearchName>
Sets the bit rate switching bit for identifier and identifier + data searches.
The setting is available in CAN FD option R&S RTE-K9.
Protocols