Rohde & Schwarz RTE Series - Page 1840

Remote control commands
R&S
®
RTE
1840User Manual 1326.1032.02 ─ 20
BUS<m>:USBPd:RESult:FCOunt?
Returns the number of decoded frames in the selected serial bus.
Suffix:
<m>
.
1..4
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
Usage: Query only
BUS<m>:USBPd:RESult:FRAMe<n>:DATA?
Returns the data from the frame with the selected frame number (for the selected serial
bus). This is the hex value of the first four bytes of data fields, prefixed by the total
number of data fields (in square brackets), e.g. [5]FF008041.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Data>
Usage: Query only
BUS<m>:USBPd:RESult:FRAMe<n>:FLD<o>:FVAL?
Returns the formatted value of the field with the selected field number within the frame
with the selected frame number (for the selected serial bus).
Suffix:
<m>
.
1..4
<n> *
Selects the frame number.
<o> *
Selects the field number.
Return values:
<FrameByteValue>
Usage: Query only
BUS<m>:USBPd:RESult:FRAMe<n>:FLD<o>:STATus?
Returns the status of the field with the selected field number within the frame with the
selected frame number (for the selected serial bus).
Suffix:
<m>
.
1..4
Protocols