Rohde & Schwarz RTE Series - Page 379

Measurements
R&S
®
RTE
379User Manual 1326.1032.02 ─ 20
Protocol Frame Field
Ethernet MAC
Sleep
EOS
Preamble
SFD
Dest
Src
Len/Type
Data
FCS
Idle Triplet
100BASE-T1 MAC
Fill
Preamble
SFD
Dest
Src
Len/Type
Data
FCS
Idle Triplet
Also, if a label list is loaded and enabled for the protocol, the symbolic label names can
be selected from the "Frame"/"Field" value list.
Figure 8-10: Frame list for the CAN protocol with applied label list
"Frame"
Selects the type of start frame (from) / end frame (to).
"Field"
Selects the type of start field (from) / end field (to).
"Value"
Sets a value for the selected field.
Remote command:
MEASurement<m>:PROTocol:F2FRame:FRMFrom on page 1297
MEASurement<m>:PROTocol:F2FRame:FRMTo on page 1297
MEASurement<m>:PROTocol:F2FRame:FLDFrom on page 1296
MEASurement<m>:PROTocol:F2FRame:FLDTo on page 1296
Automatic measurements