Protocol analysis
R&S
®
RTE
722User Manual 1326.1032.02 ─ 20
The color-coding of the various protocol sections and errors simplifies the interpretation
of the visual display. The decode information condenses or expands, depending on the
horizontal scale. Various data formats are available to show the result values.
Examples
The example in Figure 13-60 shows decoded signals in 100BASE-T1.
Figure 13-59: 100BASE-T1 decoded signal
green brackets [...] = start / end of frame
dark cyan frame = frame ok
red frame = error frame
light purple = destination address
purple = source address
orange or yellow = data
light gray = idle
gray = filler
dark gray = reserved
light blue = check
blue = marker
dark blue = sync / SFD
lime = count
Enable "Show Details" in the decode table to display a more detailed analysis of the
selected frame.
Ethernet 100BASE-T1 (option R&S
RTE-57)
To Next Page
Loading...
