Protocol analysis
R&S
®
RTE
823User Manual 1326.1032.02 ─ 20
"USB Full speed"
Selects USB 2.0 full speed protocol (12 Mbit/s).
Figure 13-98: USB full speed protocol configuration
"USB High speed"
Selects USB high-speed protocol (480 Mbit/s). As the signal is differ-
ential, there is only one source and one threshold to be defined.
Figure 13-99: USB high-speed protocol configuration
"USB HSIC"
Selects USB high speed inter-chip (HSIC) protocol.
Figure 13-100: USB HSIC protocol configuration
Remote command:
BUS<m>:USB:TECHnology on page 1791
USB (option R&S
RTE-K60)
To Next Page
Loading...
