Rohde & Schwarz SMU200A - Page 174

Instrument Function
R&S
®
SMU200A
154Operating Manual 1007.9845.32 ─ 15
"Clear Path"
Deletes all image files with extensions bmp, img, png, xpm and csv in
the directory set for automatic naming.
Before deleting the image files a warning message is displayed requiring
the confirmation.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar on page 535
"Prefix"
Automatic naming only
Activates the usage of the prefix in the automatic file name. The prefix is
entered in the field to the right of checkbox.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe on page 537
"Enter prefix"
Automatic naming only
Enters the prefix for the automatically generated file name. The use of
the prefix is activated in the checkbox to the left.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix on page 537
"Date - Year /
Month / Day"
Automatic naming only
Defines the components of the automatically generated file name. The
selectable parameters are year, month and day. If activated the current
year, month or day used in the file name.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe on page 538
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe on page 537
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe on page 536
"Current Auto
Number"
Automatic naming only
Indicates the number which is used in the automatically generated file
name.
Note: On initially switching on the device the number will be reset to the
lowest possible value. Starting with number 0 the output directory will be
scanned for already existing files. As long as files with the same name
are existing the number will be increased by 1. The number will be auto-
matically set to a number so that the resulting file name will be unique
within the selected path. The current number will not be saved in the save
recall file but will be temporarily stored within the database. On subse-
quent saves the number will be increased.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer on page 537
"Resulting File
Name"
Automatic naming only
Indicates the automatically generated file name.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO:FILE on page 535
General Instrument Settings