Instrument Function
R&S
®
SMU200A
403Operating Manual 1007.9845.32 ─ 15
Multi Segment File Contents
The upper part of the dialog provides the functions, necessary to create and adjust the
contents of the multi segment file.
Multi Segment Table
The table lists the individual waveforms (segments) of the selected multi segment wave-
form. The information about the segments is taken from the tags of the corresponding
waveform files.
"Segment#"
Indication of segment index. The segment index is used to select the
segment to be output.
The segment index also defines the sequence of the output during trig-
gering in the "Next Segment" or "Next Segment Seamless".
"Waveform"
Indication of the waveform file name of the segment.
"Clock Rate"
Indication of the clock rate of the segment.
"Samples"
Indication of the number of samples in the segment.
"Period"
Indication of the segment duration.
"Path"
Indication of the location of the waveform file used for the corresponding
segment.
"Comment"
Indication of the comment on the segment.
"Info"
Opens a dialog with detailed information about the currently selected
waveform.
SCPI command:
n.a.
Append
Opens the file menu to enter the file name of the waveform file to be appended.
SCPI command:
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:SEGMent:APPend on page 616
Delete
Deletes the selected segment.
SCPI command:
n.a.
Shift Seg.# Up/Down
Shifts the selected segment up and down.
Baseband Signal - Baseband Block
To Next Page
Loading...
