Remote Control Commands
R&S
®
SMU200A
704Operating Manual 1007.9845.32 ─ 15
CORR:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into user correction lists.
CORR:DEXC:AFIL:SEL 'D:
/user/ucor/import/ucor.csv'
selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL 'D:/user/ucor/import/ucor_imp'
selects that the ASCII file ucor.csv is imported into user correction
list ucor_imp.
Example:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn <Column>
The command selects the separator between the frequency and level column of the ASCII
table.
Parameters:
TABulator|SEMicolon|COMMa|SPACe
SEMicolon|
<Column>
*RST:
CORR:DEXC:MODE EXP
selects that the user correction list is exported into an ASCII file.
CORR:DEXC:AFIL:SEL 'D:
/user/ucor/import/ucor.csv'
selects ASCII file ucor.csv as destination for the user correction
list data.
CORR:DEXC:AFIL:SEP:COL TAB
the pairs of frequency and level values are separated by a tabu-
lator.
CORR:DEXC:AFIL:SEP:DEC DOT
selects the decimal separator dot.
CORR:DEXC:SEL 'D:/user/ucor/import/ucor_imp'
selects that the user correction list ucor_imp is imported into ASCII
file ucor.csv.
Example:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal <Decimal>
The command the decimal separator used in the ASCII data between '.' (decimal point)
and ',' (comma) with floating-point numerals.
Parameters:
DOT|COMMa
DOT
<Decimal>
*RST:
SOURce Subsystem
To Next Page
Loading...
