Rohde & Schwarz SMU200A - Page 828

Remote Control Commands
R&S
®
SMU200A
808Operating Manual 1007.9845.32 ─ 15
R&S SMIQ Command Short description R&S
SMU
Remarks
[SOURce[1]:]DM:DLISt:
DELete
Delete Data list X
[SOURce[1]:]DM:DLISt:FREE?
Free space for data X
[SOURce[1]:]DM:DLISt:
POINTs?
Query length of data list X
[SOURce[1]:]DM:DLISt:
SELect
Select data list X
[SOURce[1]:]DM:FILTer:MODE
Filter mode -
[SOURce[1]:]DM:FILTer:
PARameter
Filter parameter -
[SOURce[1]:]DM:FILTer:TYPE
Filter type X
[SOURce[1]:]DM:FLISt:...
Filter lists -
[SOURce[1]:]DM:FORMat
Modulation type X
[SOURce[1]:]DM:FSK:
DEViation
Frequency deviation X
[SOURce[1]:]DM:INPut:
IMPedance
Impedance of all data and
clock inputs
X
[SOURce[1]:]DM:
LDIStortion:STATe
Low distortion on/off -
[SOURce[1]:]DM:MDELay?
Modulation delay for external
modulation
X
[SOURce[1]:]DM:MLISt:..
Mapping lists -
[SOURce[1]:]DM:PATTern
Data pattern X
[SOURce[1]:]DM:PRAMp:
ATTenuation
Level attenuation X
[SOURce[1]:]DM:PRAMp:DELay
Position of ramp envelope -
[SOURce[1]:]DM:PRAMp:SHAPe
Edge shape X
[SOURce[1]:]DM:PRAMp:
SOURce
Source for the power ramp
control signals
X
[SOURce[1]:]DM:PRAMp:TIME
Power ramping rise time and
fall time
X
[SOURce[1]:]DM:PRAMp[:
STATe]
Power ramping on/off X
[SOURce[1]:]DM:PRBS[:
LENGth]
PRBS length X
[SOURce[1]:]DM:SEQuence
Trigger mode X
[SOURce[1]:]DM:SOURce
Data source X
[SOURce[1]:]DM:SRATe
Symbol rate X
[SOURce[1]:]DM:STANdard
Standard X
Alphabetical List of R&S SMIQ Commands