Rohde & Schwarz SMU200A - Page 829

Remote Control Commands
R&S
®
SMU200A
809Operating Manual 1007.9845.32 ─ 15
R&S SMIQ Command Short description R&S
SMU
Remarks
[SOURce[1]:]DM:STATe
Digital modulation on/off X
[SOURce[1]:]DM:THReshold[:
ALL]
High/low threshold of digital
inputs
X
[SOURce[1]:]DM:TRIGger:
DELay
Trigger delay X
[SOURce[1]:]DM:TRIGger:
INHibit
Trigger inhibition X
[SOURce[1]:]DM:TRIGger:
SLOPe
Trigger slope X
[SOURce[1]:]DM:TRIGger:
SOURce
Trigger source X
[SOURce[1]:]DM:IQ:---
I/Q modulation -
SOURce<[1]|2>:IQ:
...
[SOURce[1]:]DM:IQ:
CREStfactor
Crest-Factor X
[SOURce[1]:]DM:IQ:FILTer:
FREQuency
Select I/Q filter -
[SOURce[1]:]DM:IQ:FILTer:
STATe
IQ-Filter on/off -
[SOURce[1]:]DM:IQ:
IMPairment[:STATe]
IQ impairment on/off X
[SOURce[1]:]DM:IQ:
LEAKage[:MAGNitude]
Leakage amplitude for the Q-
channel
X
[SOURce[1]:]DM:IQ:
QUADrature:ANGLe
Quadrature offset X
[SOURce[1]:]DM:IQ:PRAMp
Power ramping state -
[SOURce[1]:]DM:IQ:STATe
I/Q-modulation on/off X
[SOURce[1]:]DM:IQ:
TRANsition
IQ filter transition time -
[SOURce[1]:]DM:IQRatio[:
MAGNitude]
Imbalance X
[SOURce[1]:]DM:IQSWap[:
STATe]
Swaps the I and Q channels X
[SOURce[1]:]FM:....
[SOURce[1]:]FM[:DEViation]
FM deviation X
[SOURce[1]:]FM:
EXTernal1|2:COUPling
Coupling of external mod. input X
[SOURce[1]:]FM:INTernal:
FREQuency
Modulation frequency X
[SOURce[1]:]FM:PREemphasis
Preemphasis -
[SOURce[1]:]FM:SOURce
Modulation source X
Alphabetical List of R&S SMIQ Commands