Rohde & Schwarz SMU200A - Page 832

Remote Control Commands
R&S
®
SMU200A
812Operating Manual 1007.9845.32 ─ 15
R&S SMIQ Command Short description R&S
SMU
Remarks
[SOURce[1]:]FSIMulator:
MDELay:MOVing:DELay:
VARiation
Delay range X
[SOURce[1]:]FSIMulator:
MDELay:MOVing:LOSS
Insertion loss of moving path X
[SOURce[1]:]FSIMulator:
MDELay:MOVing:VPERiod
Speed of the delay variation X
[SOURce[1]:]FSIMulator:
MDELay:STATe
Moving Delay State X
[SOURce[1]:]FSIMulator:
PATH:DCOMponent:STATe
Discrete component on/off -
[SOURce[1]:]FSIMulator:
PATH<n>:CORRelation:
COEFficient
Correlation coefficient X
[SOURce[1]:]FSIMulator:
PATH<n>:CORRelation:PATH
Correlation off and pcorrelated
pathsPfade
-
[SOURce[1]:]FSIMulator:
PATH<n>:CORRelation:PHASe
Correlation phase X
[SOURce[1]:]FSIMulator:
PATH<n>:CPHase
Constant phase X
[SOURce[1]:]FSIMulator:
PATH<n>:FDOPpler
Doppler shift X
[SOURce[1]:]FSIMulator:
PATH:FRATio
Ratio of Doppler frequencies X
[SOURce[1]:]FSIMulator:
PATH<n>:LOGNormal:CSTD
Standard deviation Lognormal
Fading
X
[SOURce[1]:]FSIMulator:
PATH<n>:LOGNormal:
LCONstant
Local constant Lognormal-
Fading
X
[SOURce[1]:]:FSIMulator:
PATH<n>:LOGNormal:STATe
Lognormal fading on/off X
[SOURce[1]:]FSIMulator:
PATH<n>:LOSS
Path loss X
[SOURce[1]:]FSIMulator:
PATH<n>:PROFile
Fading profile X
[SOURce[1]:]FSIMulator:
PATH<n>:PRATio
Power ratio Rice-Fading X
[SOURce[1]:]FSIMulator:
PATH<n>:SPEed
Speed X
[SOURce[1]:]FSIMulator:
PATH<n>:STATe
Path on/off X
[SOURce[1]:]FSIMulator:
SEQuence
Pseudo Noise Generator on/off -
Alphabetical List of R&S SMIQ Commands