Siemens SINAMICS G120 - r2050[0...7] CO: PROFIBUS PZD receive word; PZD recv word; p2051[0...7] CI: PROFIdrive PZD send word; PZD send word

Parameters
List of Parameters
1-260
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Description: Connector output to interconnect PZD (setpoints) with word format received from the fieldbus master.
Index: [0] = PZD 1
[1] = PZD 2
[2] = PZD 3
[3] = PZD 4
[4] = PZD 5
[5] = PZD 6
[6] = PZD 7
[7] = PZD 8
Description: Selects the PZD (actual values) with word format to be sent to the fieldbus master.
Index: [0] = PZD 1
[1] = PZD 2
[2] = PZD 3
[3] = PZD 4
[4] = PZD 5
[5] = PZD 6
[6] = PZD 7
[7] = PZD 8
Notice: The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
Description: Selects the PZD (actual values) with word format to be sent to the fieldbus master.
Index: [0] = PZD 1
[1] = PZD 2
[2] = PZD 3
[3] = PZD 4
[4] = PZD 5
[5] = PZD 6
[6] = PZD 7
[7] = PZD 8
Notice: The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
r2050[0...7] CO: PROFIBUS PZD receive word / PZD recv word
Access level: 3 Calculated: - Data type: Integer16
Can be changed: - Scaling: 4000H Data set: -
Units group: - Unit selection: -
Min Max Factory setting
- - -
p2051[0...7] CI: PROFIdrive PZD send word / PZD send word
CU240B-2
CU240E-2
CU240E-2 F
Access level: 3 Calculated: - Data type: U32 / Integer16
Can be changed: U, T Scaling: 4000H Data set: -
Units group: - Unit selection: -
Min Max Factory setting
- - 0
p2051[0...7] CI: PROFIdrive PZD send word / PZD send word
CU240B-2 DP
CU240E-2 DP
CU240E-2 DP F
Access level: 3 Calculated: - Data type: U32 / Integer16
Can be changed: U, T Scaling: 4000H Data set: -
Units group: - Unit selection: -
Min Max Factory setting
- - [0] 2089[0]
[1] 63[0]
[2...7] 0