Siemens SINAMICS G120 - Fig. 2-138 8070 - Fault;warning trigger word (r2129)

Faults and warnings
Function diagrams
2-647
© Siemens AG 2011 All Rights Reserved SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Fig. 2-138 8070 – Fault/warning trigger word (r2129)
- 8070 -
Function diagram
87654321
FP_8070_97_61.vsd
Faults and warnings
G120 CU240B/E-2
13.12.2010 V4.4
Fault/warning trigger word (r2129)
[0]
[1]
[15]
r2129.15
r2129.1
0. Fault/alarm code
1. Fault/alarm code
15. Fault/alarm code
Setting, fault/alarm trigger
1. Message/signal present
0. Message/signal present
15. Message/signal present
Fault/alarm trigger word
(e.g. as trigger condition to record traces)
Message trigger
0 ... 65535
p2128 (0)
Trigger word
r2129
r2129
r2129.0