Siemens SINAMICS G120 - r0197 Bootloader vers; Bootloader vers; r0198[0...1] BIOS;EEPROM data version; BIOS;EEPROM vers; p0199[0...24] Drive object name; DO name; r0200[0...n] Power unit code number actual; PU code no. act

List of Parameters
Parameters
1-43
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Description: Displays the bootloader version.
Dependency: Refer to: r0018, r0198
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
Description: Displays the BIOS and EEPROM data version.
r0198[0]: BIOS version
r0198[1]: EEPROM data version
Dependency: Refer to: r0018, r0197
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
Description: Freely assignable name for a drive object.
In the commissioning software, this name cannot be entered using the expert list, but is specified in the configura-
tion assistant. The object name can be subsequently modified in the Project Navigator using standard Windows
resources.
Note: The parameter is not influenced by setting the factory setting.
Description: Displays the unique code number of the power unit.
Note: r0200 = 0: No power unit data found
r0197 Bootloader vers / Bootloader vers
Access level: 4 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Data set: -
Units group: - Unit selection: -
Min Max Factory setting
- - -
r0198[0...1] BIOS/EEPROM data version / BIOS/EEPROM vers
Access level: 4 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Data set: -
Units group: - Unit selection: -
Min Max Factory setting
- - -
p0199[0...24] Drive object name / DO name
Access level: 4 Calculated: - Data type: Unsigned16
Can be changed: C Scaling: - Data set: -
Units group: - Unit selection: -
Min Max Factory setting
0 65535 0
r0200[0...n] Power unit code number actual / PU code no. act
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: - Scaling: - Data set: PDS
Units group: - Unit selection: -
Min Max Factory setting
- - -