Siemens SINAMICS G120 - 2.6 Internal control;status words

Internal control/status words
Function diagrams
2-539
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
2.6 Internal control/status words
Function diagrams
2501 – Control word, sequence control 2-540
2503 – Status word, sequence control 2-541
2505 – Control word, setpoint channel 2-542
2510 – Status word 1 (r0052) 2-543
2511 – Status word 2 (r0053) 2-544
2512 – Control word 1 (r0054) 2-545
2513 – Control word 2 (r0055) 2-546
2520 – Control word, speed controller 2-547
2522 – Status word, speed controller 2-548
2526 – Status word, closed-loop control 2-549
2530 – Status word, current control 2-550
2534 – Status word, monitoring functions 1 2-551
2536 – Status word, monitoring functions 2 2-552
2537 – Status word, monitoring functions 3 2-553
2546 – Control word, faults/alarms 2-554
2548 – Status word, faults/alarms 1 and 2 2-555
2634 – Sequence control - Missing enable signals 2-556