Chapter 2 TL1 Reference
Retrieve Reference Parameters
106 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Retrieve Reference Parameters
This command returns the current input reference port and output clock source.
Syntax
RTRV-REF:[tid]::ctag;
Response Format
^^^"port,clksrc,clockCsrc" <cr lf>
where:
port = input reference port designated by the aid
clksrc = selected clock source [CLK-A | CLK-B | NA] for outputs
clockCsrc = an input port designated as the bypass Clock C source
Related Commands
To Next Page
Loading...
Need help?
General
