12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 75
Chapter 2 TL1 Reference
Retrieve Inventory
Retrieve Inventory
This command returns the inventory management information for the SSU-2000
Syntax
RTRV-INV:[tid]::ctag;
or
RTRV-INVENTORY:[tid]::ctag;
Response Format
The response is the complied message followed by the response message(s). A
summary for each module and shelf are returned in the following format:
^^^"aid:desc,hwpart,hwrev,hwserial,swpart,swrev,adapterpart" <cr lf>
where:
aid is the module or shelf access identifier. See the table below for details.
desc is the text name of the module. See the table below for details.
hwpart is the hardware part number. See the table below for details.
hwrev is the hardware revision level
hwserial is the hardware serial number
sw_art field is the software part number (i.e. 141xxxxx-xxx-x)
swrev field is the software revision level
adapterpart is the Input adapter part number. If empty, then the input adapter
identification is not available for the module. For detailed information about
adapter identification, refer to Specification, SSU-2000 Input Adapter/
Identification, part number 12613021-001-2.
The aid reported is the shelf address.
The
aid, desc and hwpart are per the following table:
aid desc hwpart
S1 SSU-2000 25413120-000-0
S2 – S5 SDU-2000 25413023-000-0
S1 SSU-2000e 25413140-000-0
254131140-001-0 (DT)
S2 – S5 SDU-2000e 25413141-000-0
25413141-001-0 (DT)