Symmetricom SSU-2000 Technical Reference

Chapter 2 TL1 Reference
Set IP Parameters
152 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Set IP Parameters
This command sets the Internet Protocol parameters.
Syntax
SET-PRMTR-IP:[tid]::ctag::[addr],[mask],[gate];
All IP address values are in the ###.###.###.### format.
Related Commands
Retrieve IP Parameters, on page 77
Parameter Format Description
addr Sets the IP address of the SSU-2000.
mask Sets the IP mask of the SSU-2000.
gate Sets the IP gate of the SSU-2000.

Symmetricom SSU-2000 Specifications

General

Brand	Symmetricom
Model	SSU-2000
Category	Power Supply
Language	English