12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 117
Chapter 2 TL1 Reference
Retrieve SNMP Engine ID Parameter
Retrieve SNMP Engine ID Parameter
This command returns the current SNMP engine ID. The engineId uses the MAC
address to form the Engine ID and should be formed via an algorithm in line with
"RFC 3411 Textual Convention for SnmpEngineID Description" from the MAC
address of the SNMP (Ethernet) interface. (very first bit = 1, first four octets = SNMP
Management Private Enterprise Number, fifth octet = 3 (MAC address), octets 6...11
= MAC Address).
Syntax
RTRV-PRMTR-SNMP-ENGINEID:[tid]::ctag;
Response Format
^^^"length,engineId" <cr lf>
where:
length = actual length (in bytes) of the engineid that follows
engineid = the engine ID in hex string format (an example of the hex string: 80
00 02 59 03 00 A0 6E 0E BD EE)
Related Commands
To Next Page
Loading...
Need help?
General
