Chapter 3 ICS Command Reference
USERS
254 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
USERS
Use this command to access the user list.
Level 0 Not applicable
Level 1
USERS
USERS [PWD]
Options are:
null If this option is not provided in the command, valid user
names and their associated access levels display.
PWD This option changes the user’s password. This does not
allow for change of user name or access level.
Level 2 Same as Level 1 operation
Level 3 Same as Level 2 operation
Level 4 Same as Level 3 operation, with the following additions:
USERS
USERS LOGOFF comport
USERS INITUSERTABLE
USERS {ADD|PWD|ACCESS|DELETE|TEMPPWD}
USERS {DISABLE|ENABLE|UNLOCK} username
Options are:
null Displays all user names, levels, disabled/enabled state,
password aging, and lockout state.
LOGOFF comport
Allows the ADMIN user to free the other comm port so that
it may be reconfigured. The user on the other port is
immediately logged off, terminating any data they may have
been entering. The valid comport names are L, A, B, TELA,
TELB, TELC, TELD, TL1A, and TL1B.
INITUSERTABLE
Use this option to clear the user table and leave only the
built-in (default) system users. This option requires users to
confirm their intention to clear the user table by entering the
complete INITUSRTABLE command.
To Next Page
Loading...
Need help?
General
