12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 111
Chapter 2 TL1 Reference
Retrieve Security Log
Retrieve Security Log
This command retrieves the max number of the last latest security log. If there is no
count specified, it shall display the last latest one. The count is up to the max
resource of the COMM Module in the NVRAM. If it is too big, this command
automatically adjusts the number to its own maximum. The current max limit is set
to 300. Note: the actual max number is limited on the NVRAM resource.
Syntax
RTRV-SECU-LOG:[tid]::ctag::[count];
Response Format
^^^"condType,ocrdat,ocrtm:condstr" <cr lf>
where:
condType = the Security Log identification number
ocrdat = occurrence date
ocrtm = occurrence time
condstr = condition description string
Example
SSU_2000 05-10-05 15:49:08
M 1 COMPLD "1,05-10-04,18-00-47:\"LOGIN,COML,ICS,ADMIN\""
"2,05-10-04,18-01-40:\"LOGIN_FAIL,COML,ICS,ADMIIN\""
"1,05-10-04,18-01-56:\"LOGIN,COML,ICS,ADMIN\""
"4,05-10-04,18-12-11:\"AUTO_LOGOUT,COML,ICS,ADMIN\""
"1,05-10-05,15-41-29:\"LOGIN,ENET,TL1,ADMIN\""
"1,05-10-05,15-48-55:\"LOGIN,COML,ICS,ADMIN\""
;
Parameter Value Description
[count] [1 - 300] Retrieves the specified number of log events
[null] Retrieves the most recent log event
To Next Page
Loading...
Need help?
General
