12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 105
Chapter 2 TL1 Reference
Retrieve Ping
Retrieve Ping
This command allows you to ping a remote host via TCP/IP. Use this command to
verify that the SSU-2000 is communicating over a network.
Syntax
RTRV-PING:::ctag::ip;
Response Format
The response message is COMPLD if the ping was successful or DENY (SDNR) if
unsuccessful.
Related Commands
Retrieve Header, on page 71
Retrieve Name, on page 93
Parameter Value Description
ip Specifies the host address, given in the ###.###.###.###
format, where ### is a number between 0 and 255.
To Next Page
Loading...
Need help?
General
