12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 131
Chapter 2 TL1 Reference
Set Active Clock
Set Active Clock
This command changes the current output clock to the one designated in the aid. If
the aid is invalid or the clock is not available for use or clock A/R is on, the DENY
response is returned.
Syntax
SET-CLK:[tid]:[aid]:ctag;
Related Commands
Retrieve Clock Status, on page 47
Parameter Value Description
[aid] S1A1
S1A12
Sets the specified Clock module as the active clock.
To Next Page
Loading...
Need help?
General
