12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 175
Chapter 2 TL1 Reference
Set SNMPv2 User Parameter
Set SNMPv2 User Parameter
This command allows changes to the SNMPv2 security system.
Syntax
SET-PRMTR-SNMP-USER:[tid]::ctag::mode,[rdcommunity],[wrcommunity],
[level];
Related Commands
Retrieve SNMPv2 User List, on page 120
Parameter Format Description
mode ADD | DEL
MOD | INIT
ADD – Adds an entry to the user table. Requires
rdcommunity and wrcommunity.
DEL – Deletes a single entry from the user table.
Requires rdcommunity.
MOD – Modifies an entry in the user table. Requires
rdcommunity, wrcommunity, and level.
INIT – Clears all entries in the user table. Does not
require any other fields.
rd
community
Specifes a user name.
wr
community
Specifies a password for the rdcommunity.
level Specifies the user level. Defaults to 1 if not specified.
To Next Page
Loading...
Need help?
General
