12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 221
Chapter 3 ICS Command Reference
LOGIN
LOGIN
Use this command to change the active logon name and access level. The user is
logged on as the new user name and access level when the password is verified.
Level 0
LOGIN [user name]
If you do not provide a user name, the system prompts you for one.
When you enter a user name, the system prompts you for a password.
The password entry is echoed as ‘*’ characters. If the user name and
password match an entry in the user table, the user is logged on at the
assigned access level. After five minutes (default) of inactivity on the
port, the user is automatically logged off.
Level 1 Same as Level 0 operation
Level 2 Same as Level 0 operation
Level 3 Same as Level 0 operation
Level 4 Same as Level 0 operation
Remarks Use this command to access various levels of the system. This is the
only way to change access levels for a port.
If you lose the password, contact Symmetricom Global Services to
generate a new one. There is a GUEST entry, with a null password, that
is always present to gain access to Level 1.
Related BYE, USERS, DOY, COMM
RestrictionsIf no user passwords have been entered, this command is not listed in
help.
To Next Page
Loading...
Need help?
General
