12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 171
Chapter 2 TL1 Reference
Set Setup Parameters
Set Setup Parameters
This command sets or saves the configuration of the specified module.
Syntax
SET-PRMTR-SETUP:[tid]:[aid]:ctag::setup;
Related Command
Retrieve Configuration Date, on page 50
Backing Up and Restoring the Configuration, on page 182
Parameter Format Description
aid SxAy Sets or saves the configuration of the specfied module.
setup Factory Restores the module configuration to factory defaults.
Any time the configuration has changed from the factory
configuration, these configurations become the current
configurations.
User Reloads the previously saved configuration.
Save Stores the current configuration.
To Next Page
Loading...
Need help?
General
