Symmetricom SSU-2000 Technical Reference

Chapter 2 TL1 Reference
Retrieve Keep-alive Parameters
84 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Retrieve Keep-alive Parameters
The Keep-alive function causes autonomous messages to be transmitted at a user
selectable interval. This command returns the current TL1 and SNMP keep-alive
settings for the unit.
Syntax
RTRV-PRMTR-KEEPALIVE:[tid]::ctag;
Response Format
^^^"tl1time,snmptime"<cr lf>
where:
 tl1time = TL1 session timer in minutes
 snmptime = SNMP session timer in minutes.
 Times set to zero indicate keep-alive is disabled
Related Commands
Set Keep-alive Parameter, on page 157

Symmetricom SSU-2000 Specifications

General

Brand	Symmetricom
Model	SSU-2000
Category	Power Supply
Language	English