Chapter 3 ICS Command Reference
DATE
202 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
DATE
Use this command to view and set the current date.
Level 0 Not applicable
Level 1
DATE
Use this command to view the current date set within the unit. The date
format is
yyyy-mm-dd.
Level 2 Same as Level 1 operation
Level 3 Same as Level 2 operation, with the following additions:
DATE yyyy-mm-dd
Use this option to set the current date.
Level 4 Same as Level 3 operation
Remarks None
Related TIME, DOY
RestrictionsNone