Symmetricom SSU-2000 Technical Reference

Chapter 2 TL1 Reference
Set SNMPv3 Manager Parameter
176 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Set SNMPv3 Manager Parameter
This command allows you to change the SNMPv3 manager table entries.
Syntax
SET-PRMTR-SNMPV3-MANAGER:[tid]::ctag::mode,[ip],[username];
Related Commands
Retrieve SNMPv3 Manager List, on page 121
Parameter Format Description
mode ADD | DEL
| INIT
 ADD – Adds an entry to the SNMPv3 manager table.
Requires ip and username.
 DEL – Deletes a single entry from the SNMPv3
manager table. Requires ip.
 INIT – Clears all entries in the SNMPv3 manager
table. Does not require any other fields.
ip Specifes an IP address for the ADD and DEL mode
values.
username Specifies a user in the SNMPv3 manager table.

Symmetricom SSU-2000 Specifications

General

Brand	Symmetricom
Model	SSU-2000
Category	Power Supply
Language	English