Symmetricom SSU-2000 Technical Reference

12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 17
How to Use This Guide
Related Documents and Information
Other helpful documents and software tools are listed below. See your
Symmetricom representative or sales office for a complete list of available
documentation.
 SSU-2000 User’s Guide
 SynCraft management software
 TimePictra management software
Where to Find Answers to Product and Document
Questions
For additional information about the products described in this guide, please contact
your Symmetricom representative or your local sales office. You can also contact us
on the web at www.symmetricom.com.
What’s New in This Document
Revision F.01 contains the following changes and new information:
 Corrected the time format description on page 28.
 The limit range for the MTIE parameter in the ICS command INPUT, on page
214, is changed to 0 to 60 000.
 The ICS command RESTART, on page 241, now requires a valid module
address.
 The ICS command SETUP, on page 243, contains the new REPORT parameter.
 Added new parameters to the response for the TL1 command Retrieve Clock
Parameters, on page 46.
 Added the new TL1 command Retrieve Setup Parameters, on page 113.
 Added new parameters to the response for the TL1 command Retrieve GPS
Input Parameters, on page 69.
 Added new parameters to the response for the TL1 command Retrieve GPS
Data, on page 67.
 The limit range for the MTIE parameter in the TL1 command Set MTIE
Parameters, on page 161, is changed to 0 to 60 000.
 Corrected the vendor name in Table 5-10.
Note: Symmetricom offers a number of applicable training courses
designed to enhance product usability. Contact your local
representative or sales office for a complete list of courses and
outlines.

Symmetricom SSU-2000 Specifications

General

Brand	Symmetricom
Model	SSU-2000
Category	Power Supply
Language	English