12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 129
Chapter 2 TL1 Reference
Retrieve User List
TL1 Set Commands
This section provides an alphabetical listing of TL1 set commands, a description of
the command which provides the valid aid codes to use in the command, and an
example and description of the components of message lines.
The TL1 set commands allow you to set data and time or parameters for the
SSU-2000. The unit responds to set commands with a complied message or a deny
message that indicates the cause for the failure. There is no response message line
for the set commands.
To Next Page
Loading...
Need help?
General
