12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 223
Chapter 3 ICS Command Reference
MSG
MSG
Use this command to access the messaging facilities.
Level 0 Not applicable
Level 1 Not applicable
Level 2
MSG “message to send”
Use this command to broadcast a message on all active communication
sessions. The maximum length of each message is 60 characters.
Level 3 Same as Level 2 operation
Level 4 Same as Level 3 operation
Remarks The string must be entered
Related None
RestrictionsNone
Note: The MSG is implemented as an event. It displays a full
message in an autonomous event. Only 20 characters are stored in
the event log when a user queries it later.