12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 69
Chapter 2 TL1 Reference
Retrieve GPS Input Parameters
Retrieve GPS Input Parameters
This command returns the settings for the GPS Input module designated by the aid.
Syntax
RTRV-PRMTR-GPS:[tid]:[aid]:ctag;
Response Format
^^^"aid:pri,pql,sigma,posel,timel,pdop" <cr lf>
where:
aid = module access identifier
pri = priority setting of [0 – 10] with 0 = MON
pql = provisioned priority quality level [1 – 16]
sigma = this field is obsolete
posel = minimum satellite elevation for positioning purposes
timel = minimum satellite elevation for timing purposes
pdop = current pdop mask
Related Commands
Set GPS Input Parameters, on page 149
Parameter Value Description
[aid] S1A3
S1A5
Retrieves the parameters from the specified GPS Input
module.
To Next Page
Loading...
Need help?
General
