Chapter 2 TL1 Reference
Set MTIE Mask
160 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Set MTIE Mask
This command sets the MTIE mask for the selected input to predefined settings.
The predefined MTIE mask settings include both Limit 1 and Limit 2 and set and
clear thresholds. To create a user-defined mask, use the command described in Set
MTIE Parameters, on page 161.
Syntax
SET-MTIE-MASK:[tid]:[aid]: ctag::mask;
Related Commands
Retrieve MTIE Data, on page 89
Retrieve MTIE History, on page 91
Set MTIE Parameters, on page 161
Parameter Format Description
aid S1Ay[-z] Sets the selected Input module [or port] to the mask
specified in [mask]
mask PRS
DS1
G811
G823
Each option selects a specific predefined MTIE mask
To Next Page
Loading...
Need help?
General
