Chapter 2 TL1 Reference
Retrieve SNMPv3 Notification Type
122 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Retrieve SNMPv3 Notification Type
This command returns the current SNMPv3 notification type.
Syntax
RTRV-PRMTR-SNMPV3-NOTIFICATION:[tid]::ctag;
Response Format
^^^"notification" <cr lf>
where:
notification = {V2 |V3 | ALL} SNMPv2, SNMPv3, or both types when an event
occurs
Related Commands
Set SNMPv3 Notification Parameter, on page 177