Chapter 2 TL1 Reference
Retrieve LRM Port Circuit ID
88 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Retrieve LRM Port Circuit ID
This command returns the DS1 or E1 LRM port circuit id.
Syntax
RTRV-PRMTR-LRMCID:[tid]:[aid]:ctag;
Response Format
^^^"aid:cid" <cr lf>
where:
aid = module or port access identifier
cid = the circuit id, which is a string from 0 to 43 characters long
Related Commands
Set LRM Circuit ID, on page 159
Parameter Value Description
[aid] ALL Retrieves the parameters from all Line Re-Timing modules
in the shelf.
SxAy[-z] Retrieves parameters from the specified Re-Timing
module [or port].
To Next Page
Loading...
Need help?
General
