Symmetricom SSU-2000 Technical Reference

Chapter 3 ICS Command Reference
NAME
226 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
NAME
Use this command to view and set the unit name.
Level 0 Not applicable
Level 1
NAME
Use this command to display the unit name.
Level 2 Same as Level 1 operation
Level 3
NAME unit_name
Sets the current unit name. You can use up to 20 characters for the unit
name. This name is for identification purposes only.
Level 4 Same as Level 3 operation
Remarks The name displays as part of the prompt
Related Valid names must start with a letter. If TL1 is to be used, care must be
taken in the assignment of the unit name as it is the Target Identification
(TID) for that mode.
RestrictionsNone

Symmetricom SSU-2000 Specifications

General

Brand	Symmetricom
Model	SSU-2000
Category	Power Supply
Language	English