12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 159
Chapter 2 TL1 Reference
Set LRM Circuit ID
Set LRM Circuit ID
This command sets the port circuit id (CID) for the specified DS1 or E1 Line
Re-timing Module or port.
Syntax
SET-PRMTR-LRMCID:[tid]:[aid]:ctag::[cid];
Related Commands
Retrieve LRM Port Circuit ID, on page 88
Parameter Format Description
aid S1Ay[-z] Sets the parameters for the specfied LRM [or port].
cid 0 to 43 character string with all ASCII printable
characters. The string must start with an alphabetic
character.
To Next Page
Loading...
Need help?
General
