Symmetricom SSU-2000 Technical Reference

Chapter 2 TL1 Reference
Retrieve GPS Available Data
66 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Retrieve GPS Available Data
This command returns the current tracking data for the specified GPS Input module.
If the input specified is not a GPS Input module, a DENY response is returned.
Syntax
RTRV-DATA-GPS-AVAIL:[tid]:[aid]:ctag;
Response Format
A valid response message contains up to 12 lines. Each line displays information for
one of the satellites currently being tracked. The format is:
^^^"aid:chan,pn,health,azimuth,elevation"<cr lf>
where:
 aid = module access identifier
 chan = channel number for tracking the satellite
 pn = satellite PN code
 health = current health of the satellite: H (healthy) or U (unhealthy)
 azimuth and elevation = calculated orientation of the satellite
Example
SSU_2000 06-05-30 14:40:40
M 100 COMPLD
"S1A05:1,1,H,272,41"
"S1A05:2,5,H,76,13"
"S1A05:3,14,H,344,62"
"S1A05:4,15,H,164,33"
"S1A05:5,18,H,98,29"
"S1A05:6,19,H,268,11"
"S1A05:7,22,H,56,62"
"S1A05:8,30,H,110,16"
;
Related Commands
Retrieve GPS Data, on page 67
Parameter Value Description
[aid]
S1A3|S1A5
Retrieves satellite data from the specified GPS Input
module.

Symmetricom SSU-2000 Specifications

General

Brand	Symmetricom
Model	SSU-2000
Category	Power Supply
Language	English