Symmetricom SSU-2000 Technical Reference

12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 173
Chapter 2 TL1 Reference
Set SNMP Mode Parameter
Set SNMP Mode Parameter
This command sets the SNMPv2 and SNMPv3 mode and trap filter parameters.
Syntax
SET-PRMTR-SNMP-MODE:[tid]::ctag::mode,[trap];
Related Commands
Retrieve SNMP Mode Parameter, on page 118
Parameter Format Description
mode
ENA | DIS
ENAV2 |
ENAV3 |
DISV2 |
DISV3
 ENA – Enables all SNMP agents.
 DIS – Disables all SNMP agents.
 ENAV2 – Enables SNMPv2 operation in the system.
 ENAV3 – Enables SNMPv3 operation in the system.
 DISV2 – Disables SNMPv2 operation in the system.
 DISV3 – Disables SNMPv3 operation in the system.
trap ALM | ALL
 ALM – Only alarms cause Traps to be transmitted.
 ALL – All events and alarms cause Traps to be
transmitted.

Symmetricom SSU-2000 Specifications

General

Brand	Symmetricom
Model	SSU-2000
Category	Power Supply
Language	English