Chapter 2 TL1 Reference
Retrieve SNMPv2 User List
120 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Retrieve SNMPv2 User List
This command returns the current SNMPv2 user list, which is also known as the
Read Community String. The Write Community String is not displayed. This
command is only accessible by Level 4 users.
Syntax
RTRV-PRMTR-SNMP-USER:[tid]::ctag;
Response Format
^^^"readcommunity,level" <cr lf>
where:
readcommunity = the assigned Read Community String used by SNMP
level = the access level assigned to that user
Related Commands
Set SNMPv2 User Parameter, on page 175
To Next Page
Loading...
Need help?
General
