Chapter 2 TL1 Reference
Set Security Parameters
170 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Set Security Parameters
This command sets the security thresholds for user accounts.
Syntax
SET-PRMTR-SECU:[tid]::ctag::[faillogin],[lockout],[aging];
Related Commands
Set User Parameters, on page 180
Parameter Format Description
faillogin 0 | 2 - 5 Sets the number of failed login attempts before the
account is locked. 0 disables the feature.
lockout Sets the number of seconds that a user account is locked
after faillogin has occurred.
aging 0 | 10 -
360
Sets the number of days that the password is valid. After
this time has elapsed, the user must create a new
password. 0 disables the feature.
To Next Page
Loading...
Need help?
General
