Symmetricom SSU-2000 Technical Reference

Chapter 2 TL1 Reference
Set SNMPv2 Manager Parameters
174 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Set SNMPv2 Manager Parameters
This command allows changes to the SNMPv2 manager table entries.
Syntax
SET-PRMTR-SNMP-MANAGER:[tid]::ctag::mode,[ip];
Related Commands
Retrieve SNMPv2 Manager List, on page 119
Parameter Format Description
mode ADD | DEL
INIT
 ADD – Adds an entry to the manager table. Requires
an IP address.
 DEL – Deletes a single entry from the manager table.
Requires an IP address.
 INIT – Clears all entries in the manager table. Does
not require an IP address
ip Specifes an IP address for the ADD and DEL mode
values.

Symmetricom SSU-2000 Specifications

General

Brand	Symmetricom
Model	SSU-2000
Category	Power Supply
Language	English