12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 195
Chapter 3 ICS Command Reference
CLK
LOCKED Puts the software PLL mode into the lock state.
HOLD Puts the software PLL mode into the manual holdover
state.
SELECT Allows the operator to specify the clock reference.
Level 3 Same as Level 2 operation, with the following additions:
CLK {AR|ON|OFF}
CLK [xAy] WARMUP value
CLK [xAy] {MINTAU|MAXTAU} value
Options are:
AR {ON|OFF} Enables or disables the clock autoreturn mode (see the
SSU-2000 User’s Guide for information on autoreturn).
WARMUP Sets the clock warm up time in seconds.
MINTAU Sets the minimum tau value.
MAXTAU Sets the maximum tau value.
Level 4 Same as Level 3 operation
Remarks None
Related SETUP, STATUS
RestrictionsNone
To Next Page
Loading...
Need help?
General
