Symmetricom SSU-2000 Technical Reference

12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 219
Chapter 3 ICS Command Reference
IP
IP
Use this command to view current Internet Protocol (IP) address information and
access related values.
Level 0 Not applicable
Level 1
IP
Use this command to display the current IP address, subnet mask,
gateway address, and the Ethernet hardware address.
Example
SSU_2000->ip
The IP Address is 255.25.52.5
The Subnet Mask is 255.255.255.0
The Default Gateway is 0.0.0.0
The Ethernet Address is 00A06E000CCC
Level 2 Same as Level 1 operation
Level 3 Same as Level 2 operation, with the following additions:
IP {ADDR|MASK|GATE} ip_dotted_address
Options are:
ADDR Change the Internet Protocol (IP) address
MASK Change the subnet mask
GATE Change gateway address
Level 4 Same as Level 3 operation
Remarks When you change a network address, you must restart the
Communications Module in order for the changes to take effect.
Related None
RestrictionsThe IP address is in the decimal dotted address format (for example,
192.168.70.224). No name server is allowed.

Symmetricom SSU-2000 Specifications

General

Brand	Symmetricom
Model	SSU-2000
Category	Power Supply
Language	English