12713020-003-2 Revision F.01 – January 2007 SSU-2000 Technical Reference 45
Chapter 2 TL1 Reference
Retrieve CC Output Parameters
Line 2 contains:
aid = module access identifier
pstate# port state [1| 0] where (1 = ON, 0 = OFF), and # = port number
1 through 20
Line 3 contains:
aid = module access identifier
duty# = duty cycle of the module outputs [1|0], where 1 = 5/8, 0 = 50/50
Line 4 contains:
aid = module access identifier
pcomp# = phase compensation [1 – 7] and # = port number 1 through 20
Related Commands
Set CC Output Parameters, on page 136
To Next Page
Loading...
Need help?
General
